Page 56 - Ver_216S_1
P. 56
PLUTO-A1801PJ 180W Flex form factor Power supl with
Active PFC Japan made capacitor
80PLUS and OVP,OCP,SCP




180W
180W FEATURES
Flex ATX „ Power Efficiency (25°C can meet the minimum
Flex ATX
efficiency(80%) for all loading conditions (20%,50,100%))
81.5mm
„ Made in Japan capacitor (NCC )
150mm „ Internal 4 cm double bearing fan
„ Leakage current: Less 3.5 mA-rms at 264Vac, 50 Hz
„ Low ripple & noise
„ 100% Hi-pot tested
„ Hold-up Time in 16ms
40.5mm „ Power Good signal : TTL compatible on delay 100ms to
500ms , off delay 1ms
„ Short Circuit Protection
„ Over Voltage Protection
„ Over Current Protection

INPUT SPECIFICATION
Input Voltage 90V~264V
Input Frequency 47-63Hz
20 Pin 4Pin P4_12V 4 Pin 4Pin FDD SATA Input Current 3.0A@115V,1.5A at 230V

For different industrial environment, like POS, small size server station or OUTPUT SPECIFICATION
Mini-ITX system, PSU takes an important position. For those applications, Wattage 180W
PLUTO-A1801PJ not only can provide high efficiency but also high Eficiency >85%
reliability. In PLUTO-A1801PJ, capacitors are provided by NCC (Nippon Holdup Time 16ms, at full load
Chemi-Con Corporation), and its electrical characteristics is better than
other capacitors. It tolerates as high temperature as 105°C, and low Over Voltage Protection +5V:5.7V~7.0V,+12V:13.3V~16V.+3.3V:3.7
V~4.8VV
current leakage. Over Current Protection +3.3V:40A, +5V:40A, +12V:22A
High reliability is also an important feature for PLUTO-A1801PJ, Burn-in EMI & Safety Approval CE, CB, FCC, VCCI, UL, TUV, 80PLUS,
test in 0°C and 50°C for 12 hours at 100% loading is performed. In such CCC
test, PLUTO-A1801PJ can meet various environment standards and
keep stable and eficient. DC OUTPUT
In order to protect customers’ valuable data and machine, PLUTO- +5V +3.3V +12V -12V +5Vsb
A1801PJ also comes with protective function such as 100% HI-POT Max.Load 14A 10.0A 10A 0.3A 2.5A
Test, Short Circuit Protection, Over Voltage Protection and Over Current Min.Load 0.2A 0.1A 0.6A 0A 0A
Protection.
Load Reg. ±5% ±5% ±5% ±10% ±5%
MECHANICAL DRAWING Ripple 50mV 50mV 120mV 120mV 50mV
Noise
120mV
50mV
50mV
120mV
50mV
��.��±�.�� GENERAL SPECIFICATION
��.��±�.�� MTBF 10,000 Hours at 100% loading
Temperature/ Storage: -20°C ~ 80°C, 5% ~ 25°%
(non-condensing)
Humidity Operation: 0°C ~ 50°C, 5% ~ 85°%
(non-condensing)
Dimension (W x D x H) 81.5 x 150 x 40.5mm; 5.9” x 3.2” x 1.6”
���.��±�.� ���.��±�.� ���.��±�.� Risetime 0.1 ms to 20 ms.





��.��±�.�� ��.��±�.��
��.��±�.�� ��.��±�.�� 20 Pin 4Pin P4_12V 4 Pin 4Pin FDD SATA x2


��.��±�.��


55 PSU-PLUTO-A1801PJ
   51   52   53   54   55   56   57   58   59   60   61