Page 57 - Ver_216S_1
P. 57
PLUTO-A2501PJ 250W Flex form factor Power supply
with Active PFC Japan made capacitor
80 PLUS and OVP, OCP, SCP



FEATURES
250W
250W
250W
250W 250W 250W 250W Power Efficiency (25°C and 50°C can meet the
250W
Flex ATX
Flex ATX
Flex ATX
Flex ATX Flex ATX 81.5mm Flex ATX „ minimum efficiency (80%) for all loading conditions
Flex ATX
Flex ATX
(20%,50,100%))
150mm „ Made in Japan capacitor (NCC and RUBYCON)
„ Support Intel Cerelon series
„ Fan Control (Internal 4 cm fan)
„ Audible Noise (40 dB ± 4dB)
„ Remote on/off Control
40.5mm „ Hold-up Time in 17ms
„ Power Good signal : TTL compatible on delay 100ms to
500ms, off delay 1ms
„ Over Temperature Protection
„ Short Circuit Protection
„ Over Voltage Protection
„ Over Current Protection
INPUT SPECIFICATION
Input Voltage 90V~264V AC
20 Pin 4Pin P4_12V 4 Pin 4Pin FDD SATA Input Frequency 47Hz~63Hz
In an attempt to provide stable output and high reliability for different Input Current 4.0A@90V and 264V
applications (communications, networks, servers and work stations),
Portwell conducted a research to provide suitable PSU. In PLUTO series, OUTPUT SPECIFICATION
only high quality components to meet those requirements are chosen. Wattage 250W
The electrical characteristics of the PSU describe the quality of its outputs. Eficiency >=80%
In PLUTO-A2501PJ, all capacitors are from Japanese manufacturers: Holdup Time 17ms, at full load
NCC and RUBYCON. The case material of PLUTO-A2501PJ is SECC Over Voltage Protection +5V:5.5V~6.8V, +12V:13.2V~16.0V,
that comes with high thermal conductive properties which helps to provide +3.3V:3.7V~4.6V
higher heat dissipating capacity. Over Current Protection +5V:20A, +12V:20A, +3.3V:18A
High reliability is also an important feature for PLUTO-A2501PJ. Burn-in
test in 0°C and 50°C for 12 hours at 100% loading is performed. In such EMI & Safety Approval CE, CB, FCC, VCCI, UL, TUV, 80PLUS
test, PLUTO-A2501PJ can meet various environment standards and keep
stable and eficient. DC OUTPUT
For the beneit of valuable machine and data, PLUTP-A2501PJ provides +5V +3.3V +12V -12V +5Vsb
full protection including Over Temperature Protection, Short Circuit Max.Load 12A 10A 16A 0.3A 2A
Protection, Over Voltage Protection, and Over Current Protection .
Min.Load 1.0A 0.5A 1.0A 0A 0A
Load Reg. ±5% ±5% ±5% ±5% ±5%
MECHANICAL DRAWING Ripple 100mV 100mV 20mV 200mV 200mV
Noise 100mV 100mV 20mV 200mV 200mV
��.��±�.�� GENERAL SPECIFICATION
��.��±�.�� MTBF 100,000 Hours at 100% loading


Storage: -40°C ~ 70°C, 5% ~ 25°%
Temperature/ (non-condensing)
Humidity Operation: 0°C ~ 50°C, 5% ~ 85°%
(non-condensing)
Dimension (W x D x H) 81.5 x 150 x 40.5mm; 5.9” x 3.2” x 1.6”
���.��±�.� ���.��±�.� ���.��±�.� Storage altitude -75.03~15250 meter
Operation altitude
-75.03~3000 meter




��.��±�.�� ��.��±�.�� ��.��±�.��
��.��±�.��

��.��±�.�� 20/24 Pin 4Pin P4_12V x2 4 Pin 4Pin Fdd SATA x2



PSU-PLUTO-A2501PJ 56
   52   53   54   55   56   57   58   59   60   61   62