Page 58 - Ver_216S_1
P. 58
PLUTO-D3501PJ 350W PS/2 ATX PSU with active PFC
Japan made capacitor 80 PLUS and
SCP, OCP,OPP


FEATURES
350W
350W „ Meets ATX 12V V2.3 standard
PS/2 ATX „ Dual forward converter design
PS/2 ATX
150mm
„ Active PFC (power factor correction) > 0.99
140mm „ Double independent +12V output
„ Power Efficiency (25°C and 50°C can meet the minimum
efficiency (80%) for all loading conditions (20%,50,100%))
„ Leakage current: Less 3.5 mA-rms at 264Vac, 60 Hz
„ Made in Japan capacitor (RUBYCON)
85mm „ Fan Control (Internal 80mm fan)
„ Remote ON/OFF Control
„ Hold-up Time in 16ms
„ Power Good signal : TTL compatible on delay 100ms to
500ms
„ Short Circuit Protection
„ Over Voltage Protection
„ Over Power Protection

INPUT SPECIFICATION
Input Voltage 90V~264V AC
20 Pin 4Pin P4_12V 6+2 Pin 4 Pin 4Pin FDD SATA Input Frequency 50-60Hz
For most PS/2 ATX in IPC applications are for server station and Input Current 8A@115V,8A@230V
communication system; In those environments, heat is the major cause
of output de-rating. PLUTO-D3501PJ also remains 80% de-rating output OUTPUT SPECIFICATION
at 50°C which allows the whole system to work in high temperature Wattage 350W
environment. In addition, for various demands, PLUTO-D3501PJ provides Eficiency >=80%
dual +12V output for different devices. Holdup Time 16ms, at full load
In order to ensure the output of PLUTO-D3501PJ is stable and reliable, it Over Voltage Protection 3.3V@4.8V , 5V@7.0V, 12V@15.6V
has dual forward converter design and RUBYCON high quality Japanese EMI & Safety Approval CE, CB, FCC, VCCI, UL, TUV, 80PLUS
capacitor, thus it has shown high performance at 50°C, 12 hours at 100 % Over Power/ Outpout power over 120%~160%
loading Burn-in test. Load Protction
PLUTO-D3501PJ has 80PLUS certiication which helps to reduce energy
consumption, and hence to save cost of electricity. DC OUTPUT
+5V +3.3V +12V1 +12V2 -12V +5Vsb
MECHANICAL DRAWING Max.Load 12A 18A 18A 18A 0.3A 2.5A
Min.Load 1A 1A 1A 1A 0A 0A
�� ��� Load Reg. 115W 302W
Ripple 50mV 50mV 120mV 120mV 120mV 50mV
��
Noise 50mV 50mV 120mV 120mV 120mV 50mV
��
GENERAL SPECIFICATION

MTBF 100,000 Hours at 100% loading
Storage: -40°C ~ 70°C, 10% ~ 25°%
Temperature/ (non-condensing)
Humidity Operation: 5°C ~ 50°C, 20% ~ 85°%
(non-condensing)
���
Dimension (W x D x H) 150 x 140 x 85mm; 5.9” x 7.2” x 3.4”
Risetime 10 ms.







��� ��
���
20/24 Pin 4Pin P4_12V 6+2 Pin 4 Pin x3 4Pin FDD SATA x2

57 PSU-PLUTO-D3501PJ
   53   54   55   56   57   58   59   60   61   62   63