Page 59 - Ver_216S_1
P. 59
PLUTO-D5001PJ 500W PS/2 ATX Power Supply with
active PFC Japan made capacitor 80

PS/2 ATX „ Meets ATX 12V V2.3 standard
150mm „ Dual forward converter design
140mm „ „ Support Intel Core i series and Xeon Series CPU
Active PFC (power factor correction) > 0.99
„ Double independent +12V output
„ Power Efficiency (25°C and 50°C can meet the minimum
efficiency(80%) for all loading conditions (20%,50,100%))
„ Leakage current: Less 3.5 mA-rms at 264Vac, 60 Hz
85mm „ Made in Japan capacitor (RUBYCON)
„ Fan Control (Internal 80mm fan)
„ Remote ON/OFF Control
„ Hold-up Time in 16ms
„ Power Good signal : TTL compatible on delay 100ms to
„ Short Circuit Protection
„ Over Voltage Protection
„ Over Power Protection

20 Pin 6+2 Pin 4+4 Pin 4 Pin 4Pin FDD SATA Input Voltage 90V~264V AC
To ensure PSU has well-appointed output for various devices in industrial Input Frequency 50-60Hz
environment, PLUTO-D5001PJ provides powerful output with dual +12V Input Current 10A@115V,8A@230V
for different IPC applications. For quality output in PLUTO-D5001PJ, OUTPUT SPECIFICATION
RUBYCON Japanese capacitors are used to reduce current leakage and Wattage 500W
lower ESR. It helps PLUTO-D5001PJ to maintain high level of stability
and reliability output for various valuable machine. PLUTO-D5001PJ Eficiency >=80%
also passed 50°C, 12hours at 100% loading Burn-in test which shows Holdup Time 16ms, at full load
its high reliability. In addition, PLUTO-D5001PJ remains 80% de-rating Over Voltage Protection 3.3V@4.8V, 5V@7.0V, 12V@15.6V
output at 50°C which allows the whole system to work in high temperature EMI & Safety Approval CE, CB, FCC, VCCI, UL, TUV, 80PLUS
environment. Over Power/ Outpout power over 120%~160%
80PLUS certiication can reduce energy consumption and hence to save Load Protction
cost of electricity, therefore, PLUTO-D5001PJ can be high efficient and DC OUTPUT
keep green at the same time.
+5V +3.3V +12V1 +12V2 -12V +5Vsb
MECHANICAL DRAWING Max.Load 22A 24A 28A 20A 0.3A 2.5A
Mini.Load 1A 1A 1A 1A 0A 0A
�� ��� Max.Watt 130W 456W
Ripple 50mV 50mV 120mV 120mV 120mV 50mV
Noise 50mV 50mV 120mV 120mV 120mV 50mV
MTBF 100,000 Hours at 100% loading
Temperature/ Storage: -40°C ~ 70°C, 10% ~ 95%
Humidity (non-condensing)
Operation: 5°C ~ 50°C, 20% ~ 85%
Dimension (W x D x H) 150 x 140 x 85mm; 5.9" x 7.2" x 3.4"

��� �� 20/24 Pin 6+2 Pin 4+4 Pin 4 Pin x3 4Pin FDD SATA x4

   54   55   56   57   58   59   60   61   62   63   64