• Qseven carrier board accept Portwell Qseven modules
  • 3.5″ ESB form factor to embedded applications
  • On Board DC to DC circuit for DC in application
  • Mini-PCIe support
  • Support boot from SD(SDIO 1.1)

Portwell PCOM-C100XL is designed with Q7 230pin card edge MXM connecter, suitable for initial evaluation testing in PCI-E, Mini PCI-E, VGA/LVDS, SATA, LAN, AUDIO, SDIO, LPC etc. interfaces before developing your own application focused customized carrier board.


Format3.5″ ESB
Display InterfaceVGA
StorageSD Card slot, one mini-PCIe, two SATA ports
NetworkGbE port
USBFour rear USB ports, Three USB header
Audioone MIC-IN, one LINE-OUT
Power RequirementDC 12V
Operating Temperature-40°C ~ 85°C
Extended Temperature-40°C ~ 85°C
Dimensions146mm x 102mm

Ordering Guide

Ordering Guide
AB1-3326PQ7-C100XL 3.5″ QSEVEN Carrier Board
AB1-3667PQ7-C100XL-CAN 3.5″ QSEVEN Carrier Board with CAN Bus


(Documents & Downloads)
  Catalog   PQ7-C100XL | Catalog 212A-1   2012 年 9 月 4 日
178.81 KB 1376 Downloads
      User’s Manual   Manual_PQ7-C100XL_R30.zip | Manual 3.0   2012 年 2 月 9 日

    PQ7-C100XL user’s manual

    845.82 KB 321 Downloads
      User’s Manual   Manual_PQ7-C100XL_R20.zip | Manual 2.0   2011 年 8 月 25 日

    PQ7-C100XL user’s manual

    1.22 MB 329 Downloads
      User’s Manual   Manual_PQ7-C100XL_R11.zip | Manual 1.1   2011 年 8 月 18 日

    PQ7-C100XL user’s manual

    17.11 MB 337 Downloads
      User’s Manual   Manual_PQ7-C100XL_R10.zip | Manual 1.0   2009 年 10 月 20 日

    PQ7-C100XL User Manual Rev 1.0

    876.30 KB 379 Downloads


      Welcome to Portwell ,the web-based service/support site that could provide you technical demands and product knowledge.