Portwell Global

WMP-24P

Fanless Hot-swappable Batteriesor UPS Battery for IP54 / 23.8″ / Medical Grade / Antimicobial Touch Surface to Housing
WMP-24P-F-web
WMP-24P-F-web-02
WMP-24P-Back
WMP-24P-IO-web
WMP-24P-F-S-web-04
WMP-24P-F-S-web

Features

  • Mobile Intel® 12th/13th generation Core i CPU (U series)
  • The newest regulation EN 60601-1: 2006/A2:2021 Compliance
  • 23.8″ (1920X1080) MVA Diagnostic Panel w/ P-Cap Multi-Touch
  • Optional Hot-Swappable Batteries X3; IP54 rear cover batteries x 1
  • Optional IP54 Rear w/Full Sealed Upside Housing Sku
  • Fanless Design with Reliable Thermal Solution
  • Dual storage M.2 NVMe SSD & 2.5” drive (w/ doggy door)
  • Hospital white Plastic Housing with Anti-bacteria Treatment
  • Battery Charger Station, 4KV Isolated I/O kit, DICOM GSDF Calibration & More Options for Diversified Applications
  • Support PCIex4 Expansion Slot
Datasheet
Best Suit for Non-Powered Medical Carts
Up to Three Hot Swappable Batteriesor UPS Battery for IP54 Sku

These medical cart panel PC with hot swappable batteries are designed to be used with non-powered carts. Hot swap batteries provide up to 8-10 hours of up time on a single charge. Wincomm innovated i-Control intelligent management SW to optimize CPU, Thermal, and Power performance to utilize computing performance to secure medical professionals using safty in any condition while under mobile medical cart applications.

  • Anti-MRSA Housing stands up to Chemical Disinfection
    These medical cart computers have an special antimicrobial housing, including touch panel, to battle surface contamination (MRSA), an IP65 rated sealed front bezel making it easy to clean and disinfect.
  • Global Latest UL/cUL 60601-1 and IEC60601-1 & 60601-1-2 Medical Certifications (MDR) 
    Medical grade, and certified to be safe for near patient use. These computers were designed from the ground up to meet global medical safety standards.
  • 12th Gen Intel Core CPU
    Our medical cart computers WMP-xxP series offer the 12th generation Intel Core i3/i5/i7 processor series.

    1. Support Intel® Vpro Technology by CPU suit for intelligent remote control SW management,
    2. FHD video real-time streaming to support hospital theatre on real-time surgical imaging needs.
    3. 5M Webcam & RFID antenna & TPM 2.0 & Display Interface for up to 2, and HDMI® Video-In
    4. USB 3.2 Gen II X 4, Optional USB X 2
    5. Expansion PCIx4 for Optional Video Capture Card, Vision Acceleration Card Support
    6. Optional IP54 for Operating Room Solution
    7. Optional Isolated I.O. Configuration
    8. Optional Light Sensor for Auto-Dimming to be Friendly During Ward Round
    9. Optional DICOM Part 14 Module
General
Model WMP 24P IP0A (STD) WMP 24P IP0P (IP54) WMP 24P IP0B (ISO)
Main System
CPU / Chipset FCBGA1744 Intel® 12th/13th Gen. Core i7/i5/i3 & Celeron Processor (15W Max.) / Support Vpro by Core i7/i5 CPU
Graphic Intel® Iris Xe Graphics (i7/i5 CPU) / Intel® UHD Graphics (i3 CPU)
RAM Two 4800 MHz DDR5 SODIMM Socket Support Dual Channel, non-ECC, up to 64GB
OS Support Optional Win 10 IoT Enterprise LTSC, Win 11 IoT Enterprise GAC
Storage 1 x M.2 (M Key 2280) with PCIex4 for SSD
Standard rear cover:2.5” SATA3 HDD/SSD drive bay x 1 with doggy door
IP54 rear cover:2.5” SATA3 HDD/SSD drive bay x 1
Expansion 1 x PCIex4 (25W max.), 1 x M.2 E Key
Display Size 23.8” wide TFT-Color LCD (16:9)
Display 1920 x 1080 (Full HD), 16.7M colors (Ture 8 bit), 178(H) / 178(V), 250 nits (Typ. Center point), CR:3000: 1 (Typ)
Touch Screen Projected Capacitive Multi-Touch Panel / Light Transmission: ≥ 85% / Hardness: 7H pencil, pressure 765g/45° / Life: 50000
I.O. Ports
USB 4 x USB3.2 gen II 4 x USB3.2 gen II,
1 x ISO USB 2.0
COM 1 x RS232/RS422/RS485
1 x RS-232		 1 x ISO RS232/RS422/RS485
1 x ISO RS-232
LAN 2 x RJ45 (1 x 1.0 Gbps, 1 x 2.5 Gbps) 2 x RJ45 (1 x 1.0 Gbps, 1 x 2.5 Gbps),
1 x ISO RJ45
Audio 1 x Line-out & 1 x Microphone-in (3.5mm phone jack)
Video 1 x DP1.4a, 1 x HDMI2.0, 1 x HDMI® (video-in ; without audio ; Not support in S5 mode)
Speakers & Microphone 2 x 2-watt Speakers & Integrated Microphone (at Housing Bottom Side)
Reading light Light bar x 2 (at housing bottom side)
Control Hot Key (R to L) Battery LED Indicator, Power On/Off, Volume +/-, Brightness +/-, Reading Light, LCD Backlight On/Off, Clean Me, Function Key
Mechanical and Environmental
Cooling Fanless Design with External Heatsink
Battery Pack Optional DR-202 Series, Li-ion Battery x 3, Hot Swappable Optional DR-202 X 1, UPS Battery Optional DR-202 Series, Li-ion Battery x 3, Hot Swappable
Power Input / Power Adaptor DC-In x 1, DC 14-24V input/ AC input 100~240V / 47 ~ 63 Hz / DC output 24V, 180W
Temperature Operating Temperature: 0~40℃ (Burn-in, not airtight, W/ Battery 0~35℃)/ Storage Temperature: -20~60℃
Humidity Operating & Storage:10 ~ 90%, non-condensing
IP Rating Front IP65, IPx1 for Whole System Front IP65, Rear IP54 Front IP65, IPx1 for Whole System
Housing Front: Full flat design/ Touch (standard)/ Glass (customized); Rear: Plastic White w/Anti-bacteria (MRSA), Housing
Dimensions (Net) 594.0mm(H) x 397.0mm(V) x 56.0 mm(T)
Weights (Net) 9.0 kg (w/o power adapter/battery pack), 10.5 kg (w/ x3 battery pack & no power adaptor)
Mounting Optional Stand, VESA 100 X 100
Certification
  • CE: EN IEC 60601-1-2:2015/A1:2021(Ed 4.1)
  • EN 60601-1: 2006/A2:2021;IEC 60601-1:2005, IEC 60601-1:2005/AMD1:2012, IEC 60601-1:2005/AMD2:2020
  • VCCI: 2016-11, Class B (PSU/Battery with PSE)
  • FCC: Part 18 Class B
  • UL: AAMI ES60601-1:2005/(R)2012 and A1:2012/(R)2012 and A2:2021 By Project
  • cUL: CAN/CSA-C22.2 No. 60601-1:14 By Project
  • ISO 14971 / IEC62133

Options & Customized

Major Options & Customization
Battery & Charger
  1. Battery Pack: 3 x DR-202 Series, Lithium-ion Battery w/ Hot-Swappable Design or 1 x DR-202 UPS Battery for IP54 Sku
  2. Battery Charger Station: JW202W2 3-Slot w/200W Power Adaptor
Add On Parts
  1. IP54 Rear Cover (optional order configuration)
  2. 802.11 be WLAN + Bluetooth module (Wifi-7)
  3. Auto focus 5M pixel webcam module
  4. 2.5” storage
  5. M.2 type 2280 module
  6. RFID (13.56MHz); RFID with single sign on
  7. TPM 2.0 module (SPI)
  8. Full HD capture card or 4K SC710N1 12G SDI capture card
  9. USB 2.0 x 2 at side (different rear housing)
  10. Smart card reader at side or CAC / PIV Reader (FIPS-201) (different rear housing)
  11. 5V1A power Jack (for Standard Type)
  12. Equipotential terminal pin
  13. AG film (Can’t exist with DICOM)
  14. Light sensor for LCD auto brightness (Can’t exist with webcam, DICOM)
  15. DICOM part 14 compliance (optional order configuration)
  16. Isolated 4KV module (optional order configuration)
  17. 30 Watt Power output card for external device
  18. USB 5/6 (USB 2.0 can’t co-exist with side USB)
  19. Integrated hot-swappable batteries (DR-202 series)
Customization
  1. Tempered glass
  2. AG Coating
  3. COM Ports Support 5V1A Output

Select Your Region & Language

Global